manuals/manuals_Support_Center_Maxx_Megatouch_20MAXX_20Crown_20Edition_20Upgrade

Table of Contents

Crown, Megatouch

MAXX, TournaCHAMP,

and

TournaMAXX

are registered trademarks of Merit Industries, Inc.

Reproduction of this manual, in any form or by any means, is strictly forbidden without the written permission of Merit Industries,

Inc.

Software Installation ................ p. 1-4

Connecting a CD-ROM Drive ..... p. 1

Program Installation ................... p. 3

Security Key Installation ............ p. 4

Adhering the Side Decals ........ p. 4

Installing a Marquee

(Upright Games Only) ............... p. 4

Software Installation

Troubleshooting ........................ p. 5

Game Name and Score

Needed for Initial Replay ......... p. 6

Main Menu .................................. p. 7-8

Credits/Pricing Menu ............... p. 9-11

Quick Price Setup ..................... p. 9

Coin-In Menu ............................. p. 10

Rental Mode .............................. p. 11

Games Menu ............................. p. 11-12

Game Setup .............................. p. 11-12

Hi Scores Menu ......................... p. 12

View/Clear Hi Scores ............... p. 12

Books Menu ............................... p. 13-14

Books Display ........................... p. 12-13

Cash Settlement ....................... p. 14

System Menu ............................ p. 15

Diagnostics Menu ..................... p. 16

Presentation Menu .................. p. 17

Operator Ad Screens ............... p. 17

Promotion Menu ....................... p. 19

Merit Money .............................. p. 19

Promo Credits ........................... p. 19

Software License

Agreements .............................. p. 20-25

English ...................................... p. 20-21

French ...................................... p. 22-23

German ..................................... p. 24-25

Software Installation

Connecting a CD-ROM or DVD Drive

Turn off power to the game.

Unlock and open the CPU section door

to gain access to the PC tray.

MAXX Countertop

: Unlock the lid, tilt

back and remove from the game.

Upright

: Unlock the monitor bezel.

In MAXX Classic, MAXX Select, MAXX

Elite, Blue MAXX, Slim MAXX and EZ

MAXX games

: Unlock and open the

rear door of the game.

Connect the 2 x 20-pin IDE connector

(see Figure 1) to the IDE interface con-

nector on the CD-ROM or DVD drive.

Make sure the red stripe on the ribbon

cable matches up with pin 1 on the IDE

interface connector (see Figure 2).

Connect the four (4) pin power con-

nector on the ribbon cable (see Figure

1) to the DC power input on the CD-

ROM or DVD drive (see Figure 2).

Megatouch MAXX Crown Edition

1 MEGATOUCH MAXX CROWN EDITION PM0501-04

CONTENTS:

QTY

PART NUMBER

DESCRIPTION

PA0089-01

CROWN EDITION CD #1

PA0089-02

CROWN EDITION CD #2

PA0089-03

CROWN EDITION CD #3

SA3511-XX or
SA3512-XX

CROWN SECURITY KEY or
CHAMPIONSHIP SECURITY KEY

IMPORTANT: If you are upgrading from software prior to Ruby, you will need to
upgrade the memory in your game before installing this upgrade. There are two
memory upgrade kits available from your distributor. One kit is for games with
Telco motherboards (KUV-108-046-01), and the other is for games with all other
motherboards (KUV-108-045-01). If you are currently running Ruby or Sapphire
software, then no further memory upgrade is required.

*The installation of this kit requires a CD-ROM (or DVD) drive and centronics ribbon cable,
which are not included.

If you do not have a centronics ribbon cable, please call Merit

Customer Service at 1-800-445-9353 or 215-639-4700 and one will be provided to you. It is
recommended that you use a CD-ROM or DVD drive of at least 8X or better that is capable
of operating on an angled surface, as you may not always have a level surface on which
to place the drive.

You must configure your CD-ROM/DVD drive as the

Master

Drive

Make sure that your CD-ROM or DVD

drive is set to MASTER. See Figure 6

for typical Master/Slave drive location.

Locate the centronics connector.

Countertop

: The connector is located

on top of the electronics box (see Fig-

ure 3).

Upright

: The connector is located on

the PC shelf (see Figure 4).

In MAXX Classic & Blue MAXX games:

The connector is located above the

motherboard assembly (see Figure 5).

In MAXX Select, MAXX Elite, Slim

MAXX and EZ MAXX games:

The con-

nector is located on the PC shelf (see

Figure 6).

Connect the centronics connector on

the ribbon cable to the centronics con-

nector on the game.

NOTE

When positioning your CD-ROM

DVD

drive, it is important that you find a

suitable place where the CD-ROM or DVD
drive will not be in danger of coming in con-
tact with any components or wires inside of
the game

PM0501-04 MEGA TOUCH MAXX CROWN EDITION 2

Megatouch™ MAXX Countertop and Upright Games

FIGURE 3 - MAXX COUNTERTOP
CENTRONICS UPGRADE CONNECTOR AND
SECURITY KEY LOCATIONS

FIGURE 4 - MAXX UPRIGHT
CENTRONICS UPGRADE CONNECTOR AND
SECURITY KEY LOCATIONS

I/O
BOARD

PC CARD
SLOTS

SECURITY
KEY

CENTRONICS

UPGRADE

CONNECTOR

CENTRONICS
UPGRADE
CONNECTOR

PC CARD

SLOTS

SECURITY
KEY

FIGURE 1 – CENTRONICS/CD-ROM-DVD IN-
TERFACE RIBBON CABLE

FIGURE 2 – REAR VIEW OF STANDARD CD-
ROM/DVD DRIVE

Centronics Ribbon Cable and CD-ROM Drive

I/O BOARD

CENTRONICS
UPGRADE
CONNECTOR

PC CARD

SLOTS

SECURITY KEY

METALWORK
BEHIND
MOTHERBOARD
ASSEMBLY

FIGURE 5 - MAXX CLASSIC AND BLUE MAXX
MOTHERBOARD ASSEMBLY - CENTRONICS
UPGRADE CONNECTOR AND SECURITY KEY
LOCATIONS

PC CARD
SLOTS

SECURITY

KEY

CENTRONICS
UPGRADE
CONNECTOR

FIGURE 6 – MAXX SELECT, MAXX ELITE,
SLIM MAXX, AND EZ MAXX CENTRONICS
UPGRADE CONNECTOR AND SECURITY KEY
LOCATIONS

CD POWER (DC INPUT)
CONNECTOR

PIN 1

CENTRONICS
CONNECTOR
(TO GAME)

IDE CONNECTOR (TO
CD OR DVD DRIVE)

Program Installation

Performing this upgrade will delete previ-
ous information and files on your hard drive.
If you want to retain any pertinent informa-
tion (ex: Books Screen information), you
will need to document that information be-

fore performing the upgrade.

The update process could take anywhere
from 15 to 20 minutes, depending on the
speed of your CD-ROM drive.

If you are connected to TournaMAXX,

you must perform an

Update From

Server

before beginning this installa-

tion so that the information is not de-

leted.

Turn on the game and insert the CD

labeled

Disc 1

into the CD-ROM/DVD

drive. If you don’t get the disc into the

drive before the game starts to boot-

up, turn off the game and turn it back

on.

10.

Microtouch touchscreens:

The message: “

By continuing with

this installation program, you in-

dicate that you accept the terms

of Merit’s software license agree-

ment

”

will appear on the screen. The

software license agreement is in the

back of this manual. If you accept the

terms, select

Yes, I agree.

ELO touchscreens:

The message: “

By touching the

screen to continue, you indicate

t h a t y o u a c c e p t t h e t e r m s o f

Merit’s software agreement. If

you do not agree to these terms,

please power down

”

will appear on

the screen. The software license

agreement is in the back of this manual.

If you accept the terms, select

Yes, I

agree.

NOTE

If you do not agree to the terms of the

agreement, reboot the game to remove the
CD, then turn the game off and disconnect
the CD-ROM drive. The game will continue
running the current software version

11. When the first CD is finished installing,

the message: “

Please replace the

current disc with disc #2 then

close the door to continue

” will ap-

pear on the screen. Remove the first

CD, insert the CD labeled

Disc 2

and

close the CD-ROM door.

12. When the second CD is finished install-

ing, the message: “

Please replace

the current disc with disc #3 then

close the door to continue

” will ap-

pear on the screen. Remove the sec-

ond CD, insert the CD labeled

Disc 3

and close the CD-ROM door.

13. When the installation is complete, the

screen will display the message “

In-

stallation Complete! Please re-

move the disc and Reboot.

”

14. Remove the CD and turn off power to

the game.

15. Carefully disconnect the ribbon cable

from the centronics connector on the

game. Be sure to grasp the connector

and not the cable itself.

3 MEGATOUCH MAXX CROWN EDITION PM0501-04

Security Key Installation

16. Locate the security key (the button-

shaped disc with the spoon handle)

on the I/O board of the motherboard

assembly.

Countertop

: See Figure 3.

Upright

: See Figure 4.

In MAXX Classic and Blue MAXX

games:

See Figure 5.

MAXX Select, MAXX Elite, Slim MAXX

and EZ MAXX games

: See Figure 6.

17. Remove the existing security key from

the I/O board and replace it with the

supplied security key.

18. Close and lock the CPU section door of

the game and restore power to the

game. When prompted, perform a

touchscreen calibration.

19. If you are connected to TournaMAXX

or TournaCHAMP, you must re-enter the

dial-in settings after completing the soft-

ware upgrade. After entering the set-

tings, make the initial call into the server

and then perform two

Updates From

Server

. Refer to the MegaNet® manual

for information on how to perform these

functions.

Adhering the Side Decals

20. Turn off and unplug the game.

21. Remove the existing decals (remove

any remaining adhesive residue with

an adhesive remover).

NOTE: Make sure not to get any adhe-
sive removing solvents or solutions on
the touchscreen, as they may damage
the screen.

22. When you are finished removing any

excess adhesive from the game, wipe

the surfaces with alcohol solvent. The

surfaces must be clean and free from

dirt for the new decals to adhere prop-

erly.

23. Partially peel the backing from the top

edge of one of the provided oval de-

cals. Center the decal on the side of

the game and apply the decal. Repeat

the same step for the other side of the

game.

24. Plug in the game and turn on the power.

25. Close and lock the CPU section door of

the game.

Installing a Marquee
(Upright Games Only)

26. If an upright marquee was included in

your kit, follow the instructions in your

owner’s manual to replace the mar-

quee. If you have an upright with coin

door, the marquee must be cut to fit.

Cut the marquee in a straight line from

one yellow arrow to the matching yel-

low arrow at the other end of the mar-

quee. Make sure you alternate be-

tween cutting the long side and short

side of the marquee so that none of the

triangles you need to use for guides

are removed.

PM0501-04 MEGA TOUCH MAXX CROWN EDITION 4

Software Installation Troubleshooting Guide

ROBLEM

ORRECTIVE

CTION

•

The game boots
from the hard
drive, not the CD
or DVD drive

•

The jumper setting on the back of the CD or DVD drive must
be set to MASTER (MA).

•

The CD or DVD drive may be defective. Try a different drive.

•

Make sure that the Centronics cable is connected correctly and
that it is completely pushed down in place.

•

Try another Centronics cable.

•

Try using an IDE ribbon cable connected between the
CD or DVD drive and the motherboard. Unplug the power to
the fans to power the drive. The IDE ribbon cable going to the
motherboard will go to the secondary IDE connector.

•

Game will not
download CD

•

Make sure CD is installed correctly. The logo should be facing
up and the CD should be seated properly in the CD/DVD tray.

•

Make sure the CDs are of the same version of software.

•

Check the CD for scratches or defects. Try a different set of
CDs or a different CD-ROM or DVD drive.

•

To verify that the CD/DVD drive is being detected by the
motherboard, install CD 2 and turn on the game. If the game
acknowledges CD 2 with an error message to re-install CD 1
and start the process over, then CD 1 is the problem. If the
CD-ROM or DVD drive is not being detected, see

CD/

DVD

drive

not recognized

below.

•

CD/DVD DRIVE
NOT
RECOGNIZED

•

An error in the CMOS configuration can create a problem
where the motherboard does not see the drive.

•

To reconfigure the CMOS, turn off the game, set DIP switch 8
to the closed position and reboot the game. The message,
“

Merit Boot Diagnostics Resetting motherboard CMOS

settings to defaults.

” will appear. Follow the directions on the

screen.

•

Game reboots
after inserting
the CDs and
turning on
power.

•

If you insert the CDs and power up and then the game reboots,
there may be a problem with the CD/DVD drive. Make sure a
newer drive is being used. Older drives may have a problem
reading the CDs correctly. (MAXX games will only reboot after
the Ruby software is loaded.)

•

The game
prompts you to
install the CD
which is already
in the CD drive.

•

If CD 2 partially loads and asks for CD 2 to be installed, this
would indicate that CD 2 is defective. Try a different set of
CDs.

•

Hard drive error
when installing
software

•

If the first CD partially loads and detects a hard drive error, the
hard drive is defective. To ensure that the hard drive is
defective, first try a different set of CDs and a different
CD/DVD drive. If the reloading attempts failed again the hard
drive is defective.

•

“INVALID KEY”
message while
attempting
software
download to the
hard drive

•

If the security key was replaced before the download, the
motherboard did not boot from the CD/DVD drive.

•

Check that the drive is set as master.

•

Check the ribbon cable connections between the drive and the
motherboard.

•

Try another CD/DVD drive or another set of CDs.

5 MEGATOUCH MAXX CROWN EDITION PM501-04

Game Name and Score Needed for Initial Replay

Solitaire, Power Solitaire, Lone Star, and Super Lone Star will always offer a replay once the

listed score is attained. The other games have to reach the score listed as well as attain the

high score for the game in order to offer a replay.

NOTE

: The available games may vary.

11 Ball/11-Up

125,000

3 Blind Mice

150,000

3 Some

150,000

Air Shot

No Replay

Astro Joe

120,000

Backjammin

125,000

Battle 31

125,000

Big Time Roller

60,000

Boxdrop

175,000

Boxglide

475,000

Boxxi

850,000

Card/Castle Bandits

200,000

Card/Crypt Raiders

175,000

Checkerz

28,000

Chip Away

125,000

Chug 21

250,000

Conquest

30,000

Crazy Hearts

65,000

Decked Out Uno Poker

100,000

Domino5

200,000

Euchre Nights

5,000

Fast Lane

100,000

Flash 7

125,000

Four Play

1,500,000

Gender Bender

125,000

Gin Rummy

55,000

GO-O-O-AL

No Replay

Great Solitaire

45,000

Hoop Jones

125

Hooter

No Replay

Jumble

120,000

Jumble Crosswords

120,000

Let It Ride Poker

125,000

Let It Ride Trivia

125,000

Lone Star

45,000

Lookout

400,000

Magic Charms

500,000

Match'Em Up

200,000

Memoree

300,000

Meteor Shower

200,000

MGA Champ. Golf

No Replay

Monster Madness

400,000

Mystery Phrase

325,000

Outer Spades

75,000

Pharaoh’s Fortune

45,000

Pharaoh’s 9

No Replay

Photo Hunt

400,000

Pile High

No Replay

Pix Mix

350,000

Power Solitaire

55,000

Power Trivia

No Replay

Puck Shot

3,000

QB Zone

65,000

Q-Shot

50,000

Quik Cell

100,000

Quik Chess

125,000

Quik Match

400,000

Quiz Show

45,000

Race Poker/Motor Match

No Replay

Royal Flash

300,000

Run 21

250,000

Snapshot

400,000

Speed Draw

125,000

Strip Club

No Replay

Super Lone Star

55,000

Super Snubbel

No Replay

Tai Play

240,000

Take 2

110,000

Tennis Ace

No Replay

Tic Tac Trivia

75,000

Tri-Castles

125,000

Trip Flip

150,000

Tri-Towers

125,000

Trivia Treasure

No Replay

Trivia Whiz

No Replay

TV Guide Mini Crossword

50,000

Vinci-Ball

400,000

Wild 8's/Wild Apes

400,000

Word Dojo

375,000

Word Fever

155,000

Word Safari

125,000

Wordster

100,000

Zip 21

200,000

Moon Drop

160,000

PM0501-04 MEGA TOUCH MAXX CROWN EDITION 6

7 MEGATOUCH MAXX CROWN EDITION PM0501-04

Main Menu

The Main Menu can be accessed by pressing the SETUP button inside the game. Use the

Main Menu to set up all game software options.

NOTE: For help with the Options in any menu section, touch the green “?” buttons
to bring up a help screen.

A summary of the Main Menu functions appears in the following table. For more detail, see

the corresponding sections of the manual.

Main Menu

Available Options

Information

CREDITS/
PRICING

•

Quick Price Setup

•

Coin-In

•

Set Value of Credit

•

Pay Per Time

•

Options

•

Clear Credits

•

Free Credits

The Credits Screens allow the operator
to set credit rules for all games, set up
the Coin-In Menu, enable the Rental
Mode feature, select freeplay mode,
and add or clear credits.

GAMES

•

Game Setup

•

Options

In the Games Screens, you can edit the
game list (choose which games are
available and in what category they
appear on the Category Menu) and
select options for individual games.

HI SCORES

•

View/Clear Hi
Scores

•

Options

Touch

CLEAR ALL GAMES

to clear all

high scores or select a particular game
to edit high scores for that game.

BOOKS

•

Books Display

•

Cash Settlement
Setup

•

Cash Settlement
Collection

The Books Screens display current and
lifetime credits information as well as
calculate and collect the location and
operator fees.

SYSTEM

•

Set Time

•

Security Setup

•

Set Game Serial
Number

•

Volume Control

•

Set 6 Star PIN

•

Data Transfer

•

Options

Set the game clock, security PIN, serial
number, game volume, 6 star PIN and
features, and system options such as
language control, 6 Star Enable, and
theft deterrent. Also use this menu to
transfer books data with a PCMCIA
flash card.

FIGURE 1 - MAIN MENU

PM0501-04 MEGA TOUCH MAXX CROWN EDITION 8

Main Menu

Available Options

Information

DIAGNOSTICS

•

Video Test

•

I/O Test

•

Touchscreen
Calibration

•

Touchscreen Test

•

View System Log

•

Checksum Test

•

System Info

•

Enters the Video Test to display the
test screens. Touch the screen to
cycle through test.

•

Tests the function of the I/O board,
DIP switches, coin meter, lockout (if
applicable), and light (EVO only).

•

Allows the operator to calibrate the
touchscreen. Follow the instructions
on the screen.

•

Checks touchscreen calibration.
Touch the crosshairs on the screen to
make sure it is accurately following
your movement.

•

Displays operations performed by the
game.

•

Checks the hard drive for missing or
corrupted files.

•

Gives details about various hardware
components in the game.

CREDIT CARD

•

Credit Card Setup

•

Dial-In Setup

•

Credit Card Test

Enters the Credit Card Set-Up Screen if a
credit card swipe is installed in your game.
For more information, see the Credit Card
Kit Installation Instructions.

PRESENTATION

•

Operator Ad Screens

Allows the operator to create ad screens
and add custom screens created on a
personal computer.

PROMOTION

•

Merit Money

•

Promo Credits

•

Options

•

Sets time periods in which location
owners can use the 6 Stars feature to
offer free credits to encourage game
play.

•

Sets time periods in which the game
offers a free credit while in Idle Mode.

•

Enables Merit Money, and Promo
Credits features.

9 MEGATOUCH MAXX CROWN EDITION PM0501-04

Credits/Pricing Menu

Quick Price Setup

Quick Price Setup allows the operator to make general pricing changes without entering

the Games Menu.

NOTE: If the game is set to 3 Credits for a Dollar, prices will be displayed in credits
unless otherwise specified.

4 Credits for a Dollar

: Sets each game to the following price settings:

TouchTunes Bonus Credit Option

: Sets jukebox credits to the following settings on the

Megatouch Combo Jukebox or MegaTunes unit:

3 Credits for a Dollar

: Sets each game to the following price settings:

FIGURE 2 - QUICK PRICE SETUP SCREEN

To see the TouchTunes credit settings, enter the Coin-In Menu after touching the TouchTunes

Bonus Credit button.

Most Games 1 Credit

: Sets the cost of all games to 1 credit except games with a default

setting of 2 credits, which will remain at 2 credits.

Most Games 2 Credits

: Sets the cost of all games to 2 credits except games with a

default setting of 2 credits, which are then set to 3 credits.

The operator can also use this screen to determine whether prices are displayed on-screen

as credits or monetary amounts. Default values are restored with the

Use Factory Default

Pricing

button. Touch the

button for more information.

COIN INPUT

COIN VALUE

COINS

CREDITS

METER PULSES

25¢

COIN INPUT

COIN VALUE

COINS

CREDITS

METER PULSES

25¢

COIN INPUT

COIN VALUE

COINS

CREDITS

METER PULSES

25¢

PM0501-04 MEGA TOUCH MAXX CROWN EDITION 10

Coin-In

To Enter The “Coin-In” Screen, Touch “Coin-In” on the Credits Menu

Game cost can be controlled two ways: by changing the number of credits required to play
a game or by changing the cost of a credit. The Coin-In Menu allows you to adjust the cost
of a credit, as well as providing a way to give players “bonus” credits for depositing a higher
amount of money.

When programming the Coin-In Menu, Channel 1 is set for the lowest value coin, Channel 2
for the next highest value, etc. If all six coin inputs are not used, the unused inputs must be
set to “N/A”. Adjust the coin/credit/meter pulse settings by touching the up and down
arrows on the field you want to change.

In the above example (UK currency), each game costs one (1) credit and the cost for a

single credit is 30p. This method is preferred if you want game cost to always be reflected

as “1 credit.”

In the above example (UK currency), the cost of a credit is set to 10p and each game costs

3 credits (for a total of 30p). This method allows game cost to be increased by the smallest

unit of currency used (e.g. increasing the cost of Solitaire to four (4) credits would increase

the game cost by 10p).

In both examples, note that meter pulses are independent of credits and only track the unit

of currency (10p in the examples). Players are given an incentive to deposit more money

by giving them “bonus” credits for depositing 50p or £1. Coins may be deposited in any

combination of values and the game will automatically register the highest number of credits

for the total amount of coins deposited. Once a game is played, any remaining fractional

credits are erased.

Generally, most countries have a factory default setting. This setting can be adjusted (as

described above), but will return if the game memory is cleared. Touch the

Default

Settings

button to return the settings to their default values.

COIN INPUT

COIN VALUE

COINS

CREDITS

METER PULSES

10p

20p

50p

1 bonus credit

1£

5 bonus credits

COIN INPUT

COIN VALUE

COINS

CREDITS

METER PULSES

10p

20p

50p

player premium 25p/credit

1£

player premium 20p/credit

MEGATOUCH MAXX CROWN EDITION PM0501-04

Rental Mode

When enabled via the Options button on

the Credits/Pricing Menu, Rental Mode

allows players to purchase a block of time

and use it to play as many games as they

want.

To set the value of a credit in Rental Mode,

select Pay Per Time from the Credits Menu.

Touch the arrows on either side of the time

interval to adjust the number of minutes of

play given for each credit. To disable any

row, set the minute value to zero.

Certain features will not be available in

Rental Mode, such as Merit Money, Promo

Credits and Free Credits. Rental mode is

also unavailable with linked games.

NOTE: It is recommended that you
clear the books when toggling Rental
Mode on and off in order to ensure
accurate bookkeeping.

Games Menu

Game Setup

The game list and prices, as well as game

options, are programmed using these

screens. The first screen shows the

various game categories and allows

access to the following general settings

for all games.

Enable All Games Into Menu

: Turns on

all games (certain games which were

previously displayed in the Game Setup

have been turned off in this software) and

defaults the price settings.

Factory Default Games Into Menu

: Re-

turns the Game Setup to its default settings.

Games that were not originally enabled will

be turned off and all price settings will be

reset.

FIGURE 3 - PAY PER TIME SCREEN

To Enter This Screen, Touch
“Pay Per Time” on the Credits Menu

To Enter This Screen, Touch “Game

Setup” on the Games Menu and

Select a Category

FIGURE 4 - GAMES MENU: GAME SETUP

When you touch a category name, the next

Game Setup Screen shows the game posi-

tions available for that category and the price

for each game, with the list at the bottom

showing all games available for the selected

category. In categories with Merit-thon

games, players who choose Merit-thon play

one round of three different games in that

category for one combined score.

The Game Setup Screen also allows you to

make these general changes:

Default Games

: Resets the selected cat-

egory menu to its default game and price

settings.

Clear One

: Clears a selected item from the

player’s game menu.

Clear All

: Clears all games from the player’s

game menu.

Enable All Games

: Turns on all games

within the selected category and defaults

the price settings.

To customize a particular game list, first se-

lect a category on the first Game Setup

Screen. On the second screen, touch

Clear

All

to clear the game list. Choose the menu

position you want a particular game to oc-

cupy by touching that position, then touch

the desired game name from the game list

on the bottom of the screen. Repeat until all

desired games appear in the menu (a game

cannot appear in the list more than once).

Games already in the menu will be red in the

game list at the bottom of the screen.

To adjust the price, touch the credit value

next to each game. Each touch will rotate

the price from 25¢ (1CR), to 50¢ (2CR), to

75¢ (3CR), to $1 (4CR), to $1.25 (5CR), to

$1.50 (6CR), to $1.75 (7CR), to $2 (8CR),

and back to 25¢ (1CR).

Some games support a continue function.

In the cost to continue column, games with-

out this function will display N/A. Games

that support continuation will show a credit

value. The cost to continue is adjustable

on a game by game basis. Touch the credit

value button to change the amount. Each

touch will rotate the price from 25¢ (1CR), to

50¢ (2CR), to 75¢ (3CR), to $1 (4CR), to

$1.25 (5CR), to $1.50 (6CR), to $1.75 (7CR),

to $2 (8CR), and back to 25¢ (1CR). Hit

NEXT to return to the Games Category page.

NOTE: The cost to continue does not
need to be the same amount as the
orignal price.

Hi Scores Menu

View/Clear Hi Scores

Use this menu to manage hi scores. The

first screen allows you to clear all scores

for all games by touching

C l e a r A l l

G a m e s

. To edit the hi scores for an

individual game, select that game on the

first screen.

To Enter This Screen, Touch

“View/Clear Hi Scores” on the

Hi Scores Menu and Choose a Game

FIGURE 5 - HI SCORES MENU:

VIEW/CLEAR HI SCORES SCREEN

Touch

Clear All

to remove all hi scores for

that particular game or select an individual

score and touch

Clear One

to remove that

particular score only.

PM0501-04 MEGA TOUCH MAXX CROWN EDITION 12

Touching a game name will display the cur-

rent and lifetime credit totals*, broken into 1-

4 player totals and linked game totals. It also

shows the shortest, average, and longest

playing times for that game.

*Touching Trivia or Power Trivia dis-

plays totals by category.

Books Display also shows coin input data,

as well as Promotional Credits and Merit

Money (when these features are enabled).

Touch Total Coins to display individual coin

input statistics

NOTE: Books data can be exported to
a file using a PCMCIA card via the Sys-
tem Menu/Data Transfer/Export Books
feature. The .data file can then be
viewed with a word processing program
after connecting the storage device to
a personal computer. The file will dis-
play basic game information such as
the software version, the game serial
number, and date/time information re-
lating to books data. The file will also
show the current and lifetime credit to-
tals, as well as credit totals for each
game featured on the machine.

FIGURE 7 - BOOKS MENU: BOOKS

DISPLAY SCREEN WITH GAME SELECTED

To Enter This Screen, Touch “Books

Display” on the Books Menu and

Choose a Game Name

Books Menu

The Books Screens display the current and

lifetime credit totals for each game, as well

as the percentage of credits played per game

(the percentage for each game is the total

number of credits played on that game di-

vided by the total number of credits entered

into the machine).

Books Display

FIGURE 6 - BOOKS MENU:

BOOKS DISPLAY SCREEN

The books information can be sorted in three

ways with the button that toggles through

the sorting categories.

Unsorted

displays

the books information in the standard order.

Sorted by Current

displays the current

credits for each game from most to least

played.

Sorted by Lifetime

displays the

lifetime credits for each game beginning with

the most played game.

Touch

Clear Current

to erase all current

books data. The date the data was last

cleared will appear at the top of the Books

Screen.

To Enter This Screen, Touch “Books

Display” on the Books Menu

13 MEGATOUCH MAXX CROWN EDITION PM0501-04

FIGURE 10 - BOOKS MENU:

CASH SETTLEMENT COLLECTION

Cash Settlement Setup

The Cash Settlement Screens are used to

calculate the percentage of earnings the op-

erator and location will receive, as well as

any fees collected by the operator.

The first screens allow you to set up the

Cash Settlement Screen. Choose YES or

NO to display the operator’s cut on the Cash

Settlement Collection Screen and enter the

percentage of revenue the location will re-

ceive. Also, select the fee calculation

method. Select per month if you do not make

regular weekly collections or per week if

you collect every 7 days. Then touch NEXT.

NOTE: Monthly fee collections are
based on 4.3 week month. If you change
your fee calculation method, the game
will auto adjust the fees by multiplying
or dividing by 4.3 and rounding to the
nearest penny.

NOTE: Make sure the time and date
are set on the game in order to ensure
correct fee calculation.

The next screen allows you to set up the

fees. The amounts can be changed on

screen by touching the amount itself and

using the keypad to enter a dollar figure.

The other two columns display the cumula-

To Enter This Screen, Touch “Cash

Settlement Collection” on the Books

Menu

To Enter This Screen, Touch “Cash

Settlement Setup” on the

Books Menu and touch “NEXT”

FIGURE 8 - BOOKS MENU:

CASH SETTLEMENT SETUP SCREEN

FIGURE 9 - BOOKS MENU:

CASH SETTLEMENT SETUP SCREEN

tive totals for each fee and the totals for the

current collection period. Fees are calcu-

lated on a prorated, per-day basis.

Touch the NEXT button to display more

groups of fees. After setting up the fees,

touch FINISH to save your changes.

Cash Settlement Collection

The Cash Settlement Collection Screens will

display the balance (total revenue minus to-

tal fees) to be split between the operator

and the location.

Touch

Revenue Details/Cash Out

Fee

Details

for breakdowns and

Clear/Com-

plete Collection

to finish. Cash Settle-

ment totals will reset once collection is com-

plete.

PM0501-04 MEGA TOUCH MAXX CROWN EDITION 14

System Menu

FIGURE 11 - SYSTEM MENU

Set Time

The Set Time Menu allows you to set both the time and date on
the game. Time is shown in 24-hour, "military" time (e.g. 5:00pm
= 17:00). Use the up and down arrows to set the time and date.

Security Setup

The operator can set the PIN number and select which of the
features (Coin-In Menu, Free Credits, Game Menu, Hi Scores,
Books, All Options, and Set 6 Star PIN) will be protected by the
PIN. To change the PIN, you must first enter the existing PIN
(the default PIN is

0000

), then enter a new 4-digit number and

touch

SET

on the keypad. The game will prompt you to re-enter

your PIN to confirm. After confirming your PIN, touch the button
for each of the features you wish to protect with the PIN.

Set Game Serial

Number

Use this screen to enter the game’s serial number using the
keypad.

Volume Control

Touch the volume control button to adjust the volume up or down.
This screen allows you to sample the sound volume without
exiting the screen. The on-screen volume control can also be
accessed using 6 Stars.

Set 6 Star PIN

(only appears if

PIN is enabled)

Brings up the Set 6 Star PIN Screen via the Options button on
the Player Menu. Set the 6 Star PIN (between one and six digits)
using this screen. You can enable this feature and choose which
options will be accessible by 6 Stars using the System Menu:
Options Screen. Touch an option box under System Menu:
Options for on-screen help.

Data Transfer

Transfer information (Books data, ad screens) using a PCMCIA
card (in MAXX games with PCMCIA card slots). Insert PCMCIA
cards before powering up the game.

Options

For help with the Options in any menu section, touch the option
box to bring up a help screen.

15 MEGATOUCH MAXX CROWN EDITION PM0501-04

Diagnostics Menu

FIGURE 12 - DIAGNOSTICS MENU

Video Test

Touch the screen to cycle through a series of video test screens.

I/O Test

Tests the SETUP and CALIBRATE buttons, all coin channels, the coin
meter, and the coin lockout feature (if applicable). A green light next to
the appropriate button will register each time that item is tested, and the
number next to the item should increment by one with each test. The
I/O Test Screen also displays which DIP switches are on or off.

Touchscreen
Calibration

Follow the on-screen instructions to calibrate the touchscreen.

Touchscreen
Test

Allows you to check the touchscreen calibration accuracy. The
crosshairs should follow your finger exactly when you move it across
the screen.

View System
Log

Displays a log of all operations performed by the game since the log
was last cleared. This information is helpful for customer service in
troubleshooting your game.

Checksum Test

Checks the hard drive for missing or corrupted files. With STOP ON
ERROR? set to YES, a message indicating which file is corrupted will
be shown whenever the game encounters an error. With STOP ON
ERROR? set to NO, a list of corrupted files will be displayed when the
test is complete. If errors are detected, the software on the drive may
need to be reloaded. If this does not solve the problem, the drive may
require replacement. The test could take up to 30 minutes.

System Info

Gives details about the following:

•

processor type and speed

•

motherboard manufacturer

•

amount of memory

•

Ethernet card manufacturer

•

sound chip type

•

video chip type

•

touchscreen manufacturer

•

hard drive manufacturer and capacity

•

modem part identification number

•

fan speed (FORCE games only)

PM0501-04 MEGA TOUCH MAXX CROWN EDITION 16

$background image$

Merit Money

The Merit Money screens allow location

owners to encourage game play by offer-

ing free games (not free credits) at certain

time intervals via the 6 Star feature. Select

days of the week, time frames, and the num-

ber of free games (1-10 per day) to be

awarded, as well as a PIN number for loca-

tion owners to use in order to access Merit

Money using the 6 Stars feature. Location

owners can enable Merit Money by entering

that specific PIN in the 6 Stars screen. One

free game is given away each time the loca-

tion enters the code until the predetermined

daily limit is reached. Free games expire

after 10 minutes, when money is deposited

into the machine, or when the Merit Money

time period comes to an end.

Promo Credits

The Promo Credits feature generates inter-

est by offering operator-controlled free cred-

its while the game is in idle mode. Select

days of the week, time frames, idle time (num-

ber of minutes the game would be in idle

mode before free credits are offered) and

the number of credits (1-10) to be awarded.

A message announcing that free credits are

available will appear on the screen during

idle mode when Promo Credits go into ef-

fect. Promo Credits expire after 10 minutes

or when the Promo Credits time period comes

to an end.

FIGURE 14 - PROMO CREDITS SCREEN

Presentation Menu

The Presentation Menu allows operators to

create ad screens and add custom screens

created on a personal computer.

Operator Ad Screens

A total of 24 advertising screens can be

created with the software and added to the

game. The ads will appear along with the

other attract screens when the game is in

idle mode. Custom images for ad screens

can also be added to the game using an

appropriate storage device for your game

(USB pen, CD, or PCMCIA card). Touch the

green

buttons on each screen for infor-

mation on how to create ad screens and

add custom screens to the machine.

In addition, a program for adding up to 120

additional ad screens can be downloaded

from our Web site (www.meritind.com) in

the Support/Software Downloads section.

FIGURE 13 - PROMOTION MENU

Promotion Menu

The Promotion Menu is designed to encour-

age player interest. Use the

Options

but-

ton to enable each feature.

17 MEGATOUCH MAXX CROWN EDITION PM0501-04

Merit Industries, Inc. Software License Agreement

Merit Industries, Inc. (“Licensor”) is willing to license the enclosed software to you only if
you accept all of the terms in this license agreement (“Agreement”).

Ownership of the Software

The enclosed Merit® product, which may include but is not limited to the Megatouch®
software program (“Software”) and the accompanying written materials are owned
by Licensor and are protected by United States copyright laws, patent laws and
other intellectual property laws, by laws of other nations, and by international treaties.

Restrictions on Use and Transfer

If this Software package contains multiple media types (such as CD’s, flash cards,
hard drives, etc), then you may use only the type of media appropriate for your
Machine. You may not use the other media types on another Machine, or transfer, or
assign them to another user except as part of the permanent transfer of the Software
and all written materials (as provided for below in paragraph 4).

You may make one copy of the software for backup purposes only. You may not
copy or make backup copies of any software security key or software security
device under any circumstances.

You may permanently transfer the right to use the Software and accompanying
written materials (including the most recent update and all prior versions) if you retain
no copies and the transferee agrees in writing to be bound by the terms of this
Agreement. Such a transfer of this license to another party immediately terminates
your license. You may not otherwise transfer or assign the right to use the Software,
except as stated in this paragraph.

You may not operate or allow the operation of the Software at locations where the
operation of such Software does not comply with all local, state, and other
governmental body laws and regulations. You agree to not use or permit the use of
the Software in violation of any U.S. Federal, state, or local laws or regulations or
any foreign law or regulation, including laws regarding gaming, gambling or intellectual
property rights in or concerning the Software.

You may not modify, adapt, translate, reverse engineer, decompile, disassemble the
Software or create derivative works from the Software or any component thereof;
nor may you remove, modify or hide or otherwise make unreadable or non-viewable
any notice, legend, advice, watermark or other designation contained on the Software,
component thereof, or output therefrom.

You agree that the Software and the authorship, systems, ideas, inventions methods
of operation, documentation and other information contained therein, and all versions,
modifications and adaptations thereto are proprietary intellectual properties of Licensor
and are protected by civil and criminal law, and by copyright, trade secret, trademark
and the patent laws of the United States and other countries.

Limited Warranty

Licensor warrants, solely for your benefit, that the Software will function in material
conformity, with its accompanying documentation for a period outlined in Licensor’s
standard product warranty period after your receipt of the Software.

Licensor’s Obligations Under Warranty

Licensor’s sole obligation under the aforesaid warranty shall be to utilize commercially
reasonable efforts to correct or modify such portion of the Software as to make it
materially conform with the applicable documentation.

PM0501-04 MEGA TOUCH MAXX CROWN EDITION 18

Grant Of License

10. Licensor grants to you a limited, non-exclusive license to distribute and/or use one

copy of the Software on a single Merit (“Machine”) accompanied by a single licensor
factory authorized security key. Licensor reserves the right to update versions of the
software and the content to the Machine as deemed appropriate by the Licensor.
You are entrusted to maintain and protect your single licensor factory authorized
security key, password, or other identification from being utilized by any third party,
and you agree to be responsible for any use of the Software provided herein by a
third party utilizing your identification. Licensor maintains the right to immediately
terminate your License for reasons related to misuse or other non-conformity with
the rules expressed herein. While Licensor does not routinely inspect Machines,
Licensor also reserves the right to inspect or audit the Software from time to time in
Licensor’s sole discretion. To the extent that Licensor’s access to the Software
requires that Licensor also gain access to a Machine in which the Software is
installed, you agree to promptly provide Licensor, when requested, with permission
and aid in Licensor gaining access to the Machine.

Disclaimers

11. EXCEPT AS PROVIDED IN THE SECTION ENTITLED “LIMITED WARRANTY”, LICENSOR

MAKES NO OTHER PROMISES, REPRESENTATIONS OR WARRANTIES, WHETHER
EXPRESSED OR IMPLIED, REGARDING OR RELATING TO THE SOFTWARE OR
CONTENT THEREIN OR TO ANY OTHER MATERIAL FURNISHED OR PROVIDED TO
YOU PURSUANT TO THIS AGREEMENT OR OTHERWISE AND LICENSOR SPECIFICALLY
DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE WITH RESPECT TO SAID MATERIALS OR THE USE THEREOF.
TO THE MAXIMUM EXTENT ALLOWABLE BY LAW THE UNIFORM COMMERCIAL CODE
OR OTHER UNIFORM LAWS SHALL NOT APPLY TO THIS AGREEMENT.

Limitation on Liability

12. IN NO EVENT SHALL LICENSOR BE LIABLE UNDER ANY CLAIM, DEMAND OR ACTION

ARISING OUT OF OR RELATING TO THE SOFTWARE, ITS USE, INSTALLATION OR
LICENSOR’S PERFORMANCE OR LACK THEREOF UNDER THIS AGREEMENT FOR
ANY SPECIAL, INDIRECT, INCIDENTAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES,
WHETHER OR NOT LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
CLAIM, DEMAND OR ACTION. IN ADDITION, WITHOUT LIMITING THE FOREGOING, IN
ALL EVENTS THE REMEDIES AVAILABLE TO YOU SHALL BE LIMITED TO THE AMOUNT
PAID BY YOU TO LICENSOR FOR THE SOFTWARE.

13. IN NO EVENT WILL LICENSOR BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY

LOSS OF PROFITS, LOST SAVINGS, OR OTHER INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF YOUR USE, MISUSE, BREACH OF THIS AGREEMENT OR
INABILITY TO USE THE SOFTWARE.

General

14. The validity and construction of this Agreement and of the rights and obligations herein

shall be determined and governed by the laws of the State of New York. By accepting
the terms of this Agreement, you acknowledge and accept that the courts of New
York, New York shall have exclusive jurisdiction and venue regarding any disputes
arising with regard to this Agreement or arising out of activity or misuse of the
Software.

15. Merit, in its sole discretion, may assign this agreement or any of its rights and

obligations hereunder.

16. If you have any questions concerning this Agreement or wish to contact Licensor for

any reason, please write: Merit Industries, Inc., 2525 State Road, Bensalem, PA
19020, USA.

19 MEGATOUCH MAXX CROWN EDITION PM0501-04

Contrat de licence de logiciel de Merit Industries, Inc.

Merit Industries, Inc. (ci-après le "Concédant") est disposé à vous accorder la licence d'utilisation
du logiciel ci-inclus, à condition que vous vous engagiez à respecter tous les termes, clauses et
conditions du présent contrat de licence (Contrat).

Droit de Propriété
1.

Le produit Merit ci-joint contenant, mais ne s'y limitant pas, le logiciel Megatouch™ (ci-après le
"logiciel") et toute la documentation écrite, restent la propriété du Concédant et sont protégés
par : les lois de droits d'auteur des Etats-Unis, les lois s'appliquant aux brevets déposés et à
la propriété intellectuelle, ainsi que par celles des autres pays et les traités internationaux.

Restriction d'Utilisation et Transfert
2.

Si le présent logiciel comprend plusieurs types de composants (tels que CD-ROM, cartes
flash, disques durs, etc), vous ne pouvez utilisez que ceux qui conviennent à votre appareil.
Il est strictement interdit de les utiliser sur un autre appareil, les transférer -ou les céder à un
autre utilisateur, sauf en cas de transfert permanent du logiciel et de toute la documentation
écrite (comme indiqué ci-dessous au paragraphe 4).

Il est interdit de copier le logiciel, à l'exception d'une copie de sauvegarde. Il est aussi interdit
de reproduire -ou faire des copies de sauvegarde des programmes de clé de sécurité ou
autres fichiers de sécurité, quelles que soient les circonstances.

Vous pouvez céder en permanence à un tiers -le droit d'utiliser le LOGICIEL et toute la
documentation écrite l'accompagnant, (ainsi que la plus récente mise à jour et toutes autres
anciennes versions) seulement si vous n'en gardez aucune copie, et si le cessionnaire
s'engage, par écrit, à respecter les termes, clauses et conditions du présent Contrat. Cette
cession à un tiers met fin à votre licence immédiatement. Autrement, vous n'avez pas la
permission de transférer ou d'accorder à un tiers le droit d'utiliser le présent logiciel, excepté
que tel que décrit dans le présent paragraphe.

Il est interdit d'utiliser le présent logiciel ou de permettre son utilisation dans des emplacements
où l'utilisation du présent logiciel n'est pas conforme aux lois et réglementations locales,
nationales ou réglementations d'autres organismes gouvernementaux. Vous acceptez de ne
pas utiliser ou d'autoriser l'utilisation du logiciel d'une manière enfreignant les lois ou regula-
tions s'appliquant à la propriété intellectuelle et au jeu, en vigueur aux Etats-Unis ou dans les
autres pays du monde, y compris les lois de l'ensemble du logiciel.

Il est interdit de modifier, adapter, traduire, démonter, décompiler, désassembler le logiciel ou
créer du matériel dérivé du logiciel ou de tout composant de celui-ci ; vous ne pouvez pas
enlever, modifier ou cacher ou rendre illisible ou non-visible toute instruction, légende, infor-
mation ou filigrane ou autre désignation qui apparaît dans le logiciel, composant dudit logiciel
ou résultant dudit logiciel.

Vous convenez que le logiciel et les droits d'auteur, les systèmes, les idées, les inventions, les
méthodes d'utilisation, la documentation et autre information incluse, ainsi que toutes les
versions, modifications et adaptations qui s'y rattachent sont les propriétés intellectuelles du
Concédant et sont protégées par le droit civil et pénal et par le droit d'auteur, le secret
commercial, la marque déposée et le brevet aux Etats-Unis et dans les autres pays du monde.

Limite de Garantie
8.

Le Concédant garantit seulement à votre intention, que le logiciel permettra une utilisation
conforme, avec la documentation l'accompagnant, pendant la période de temps indiquée
dans la période de garantie du produit standard du Concédant, à compter de la date de
livraison du logiciel.

Responsabilité du Concédant aux termes de la Garantie
9.

La seule obligation du Concédant aux termes de la garantie susmentionnée sera de faire tous
les efforts commercialement raisonnables pour corriger ou modifier la partie du logiciel pour
le rendre matériellement conforme aux spécifications de la documentation.

PM0501-04 MEGA TOUCH MAXX CROWN EDITION 20

Concession de Licence
10. Le Concédant vous accorde le droit d'utiliser une seule copie par appareil Merit (ci-après

"Appareil") accompagné d'une seule clé de sécurité autorisée en usine et fournie par le
Concédant. Le Concédant se réserve le droit de mise à jour des versions du logiciel et du
contenu de l'Appareil, quand il juge nécessaire de le faire. Il vous appartient également
d'empêcher que les mots de passe ou autres codes et la clé de sécurité soient utilisés par un
tiers. Vous acceptez d'assumer la responsabilité dans le cas de l'utilisation du logiciel par un
tiers. Le Concédant se réserve le droit de résilier votre contrat de licence à tout moment dans
l'éventualité d'une utilisation non-conforme aux clauses stipulées. Bien que le Concédant ne
contrôle pas les appareils périodiquement, il se réserve toutefois le droit de contrôler le logiciel
à tout moment et sans préavis de sa part. De surcroît, dans l'éventualité où le logiciel n'est
accessible qu'à travers la machine dans laquelle il est installé, le licencié s'engage à donner
libre accès au Concédant, ou ses représentants, à la machine et dans les plus brefs délais.

Exclusion de toute autre garantie
11. EXCEPTE COMME PREVU DANS LA SECTION INTITULEE "LIMITE DE GARANTIE", LE CONCEDANT

N'ASSURE AUCUNE AUTRE GARANTIE DE QUELQUE NATURE ET A QUELQUE TITRE QUE CE
SOIT, EXPLICITE OU IMPLICITE, EN RAPPORT AVEC LE LOGICIEL ET LES COMPOSANTS QUI
L'ACCOMPAGNENT OU, LE CAS ECHEANT, TOUT SUPPORT OU MATERIEL FOURNI
CONFORMEMENT AU PRESENT CONTRATEN PARTICULIER, LE CONCEDANT NE PEUT
DONNER AUCUNE GARANTIE, DE QUELQUE NATURE QUE CE SOIT, POUR LA
COMMERCIALISATION DE TOUS LES PRODUITS EN RAPPORT AVEC LE LOGICIEL OU AVEC
L'UTILISATION DE CELUI-CI. DANS LA MESURE OU CELA EST PERMIS PAR LA LOI, LE CODE
UNIFORME COMMERCIAL OU AUTRE LOI UNIFORME NE S'APPLIQUE PAS AU PRESENT
CONTRAT.

Limite de Responsabilité
12. LE CONCEDANT NE SERA EN AUCUN CAS RESPONSABLE DE TOUTE RECLAMATION,

DEMANDE OU ACTION RESULTANT DE OU EN RAPPORT AVEC LE LOGICIEL, SON UTILISATION
OU SON INSTALLATION, OU LA PERFORMANCE OU MANQUE DE PERFORMANCE DU
CONCEDANT EN VERTU DU PRESENT CONTRAT POUR TOUS DOMMAGES D'UNE NATURE
QUI N'EST PAS PRESUMEE PAR LA LOI ET QUI DOIVENT ETRE EXPRESSEMENT PROUVES,
DOMMAGE INDIRECTS, DOMMAGES-INTERETS POUR PREJUDICE MORAL, QUE LE
CONCEDANT AIT ETE AVISE OU NON DE LA POSSIBILITE D'UNE TELLE RECLAMATION,
DEMANDE OU ACTION. DE PLUS, SANS LIMITER CE QUI PRECEDE, LES DEDOMMAGEMENTS
A VOTRE DISPOSITION SERONT LIMITES AU MONTANT QUE VOUS AUREZ PAYE AU
CONCEDANT POUR LE LOGICIEL.

13. LE CONCEDANT NE SERA EN AUCUN CAS RESPONSIBLE : D'UNE RUPTURE DE CONTRAT,

DES DOMMAGES, Y COMPRIS TOUTE PERTE DE PROFIT, PERTES D'ECONOMIE OU TOUS
AUTRES DOMMAGES INDIRECTS OU DOMMAGES-INTERETS ACCESSOIRES DECOULANT
DE LA MAUVAISE UTILISATION OU DE L'IMPOSSIBILITE D'UTILISATION DU LOGICIEL.

Dispositions Générales
14. La validité et la construction du présent Contrat et les droits et obligations ci-inclus seront

déterminés et régis par les lois de l'état de New York aux États-Unis. En acceptant les
dispositions du présent contrat, vous acceptez également que tous litiges ou revendications
relatives seront réglés par voie d'arbitrage par un tribunal de l'état de New York, aux Etats-
Unis.

15. Merit Industries se réserve le droit de transférer le présent Contrat à un tiers ainsi que ses

droits et obligations ci-après.

16. Pour toutes questions concernant le présent Contrat -ou si vous désirez contacter le Concédant

pour une raison quelconque, veuillez écrire à : Merit Industries, Inc., 2525 State Road, Bensalem,
PA 19020, Etats-Unis.

21 MEGATOUCH MAXX CROWN EDITION PM0501-04

Merit Industries, Inc. Softwarelizenzabkommen

Merit Industries, Inc. („Lizenzgeber”) ist nur dann bereit Ihnen eine Lizenz für die

beiliegende Software zu erteilen, wenn Sie alle Bestimmungen dieses Lizenzabkommens
(“Abkommen”) akzeptieren.

Eigentumsvorbehalt der Software
1.

Das beiliegende Merit®-Produkt, welches das Megatouch® Softwareprogramm („Soft-
ware”) beinhalten kann, aber nicht darauf beschränkt ist, und die schriftlichen Unterlagen
sind Eigentum des Lizenzgebers und sind durch die Gesetze der Vereinigten Staaten
und anderer Länder und durch internationale Verträge urheberrechtlich geschützt.

Beschränkungen im Gebrauch und Transfer
2.

Sollte diese Softwarelieferung mehrere Medien enthalten (z.B. CD, Karten, Festplatten
usw.), dürfen Sie nur die für Ihre Maschine angebrachte Medienart verwenden. Die anderen
Medienarten dürfen nicht auf anderen Maschinen verwendet werden oder an Dritte
übergeben werden, abgesehen von einem endgültigen Transfer der Software und aller
schriftlichen Unterlagen (wie im untenstehenden Paragraphen 4 beschrieben).

Sie dürfen nur eine Sicherungskopie der Software herstellen. Unter keinen Umständen
dürfen Sie einen Softwaresicherungsschlüssel oder Sicherungsmaßnahmen kopieren oder
davon Sicherungskopien herstellen.

Sie dürfen das Nutzungsrecht für die Software und die schriftlichen Unterlagen (einschließlich
der aktuellen Version und aller vorhergehenden Versionen) an Dritte übertragen, wenn Sie
keine Kopie behalten und wenn der Empfänger die Bestimmungen dieses Abkommens in
schriftlicher Form akzeptiert. Bei einem solchen Transfer der Lizenz an Dritte erlischt Ihre
Lizenz umgehend. Abgesehen von den Bestimmungen dieses Paragraphen sind alle anderen
Transfers oder Übertragungen der Nutzungsrechte für diese Software unerlaubt.

Sie dürfen die Software nicht benutzen oder eine Nutzung gestatten, wenn eine
solche Nutzung der Software irgendwelche Gesetze und Verordnungen der
kommunalen oder staatlichen Behörden verletzen würde. Sie verpflichten sich die
Software nicht so zu nutzen oder nutzen zu lassen, dass sie damit gegen staatliche,
Bundes- oder Lokalgesetze oder Bestimmungen der USA oder gegen ausländische
Gesetze oder Bestimmungen, einschliesslich aller Gesetze bezüglich Glücksspiels,
Spielens oder geistigen Eigentumrechts der Software, verstossen.

Es ist Ihnen nicht gestattet, die Software abzuändern, zu verändern, zu übersetzen,
rückumzuwandeln, zu dekompilieren oder zu zerlegen, oder aus der Software oder eines
Teils davon andere Werke abzuleiten. Sie dürfen auch aus der Software, einem Bestandteil
der Software oder aus den Datenausgaben der Software keine Hinweise, Bemerkungen,
Ratschläge, Wasserzeichen oder andere Markierungen entfernen, verändern, verbergen
oder auf andere Art unlesbar machen.

Sie akzeptieren, dass die Software und die Urheberschaft, die Systeme, die Ideen,
Erfindungen, die Arbeitsweisen, die Dokumentation und alle anderen darin enthaltenen
Informationen und alle Versionen, Veränderungen, und Bearbeitungen davon das geistige
Eigentum des Lizenzgebers sind, und dass sie durch Straf- und Zivilgesetzgebung und
durch die Copyright-, Geschäftsgeheimnis-, Warenzeichen- und die Patentgesetze der
Vereinigten Staaten und anderer Länder geschützt sind.

Beschränkte Garantie
8.

Der Lizenzgeber garantiert zu Ihren Gunsten, dass die Software für die angegebene
normale Garantiezeit des Lizenzgebers nach Ihrer Annahme der Software in erheblicher
Übereinstimmung mit der beiliegenden Dokumentation laufen wird.

Verpflichtung des Lizenzgebers im Rahmen der Garantie
9.

Die ausschließliche Pflicht des Lizenzgebers im Rahmen der vorstehenden Garantie besteht
darin, alle geschäftlich vertretbaren Schritte zu unternehmen, um Teile der Software zu
berichtigen oder abzuändern, bis sie mit der beiliegenden Dokumentation erheblich
übereinstimmen.

PM0501-04 MEGA TOUCH MAXX CROWN EDITION 22

Übertragung der Lizenz
10. Der Lizenzgeber gewährt Ihnen eine beschränkte, nicht-ausschliessbare Lizenz zur

Vertreibung und/oder Benutzung einer Kopie der Software auf einem einzelnen Merit™ („Gerät”)
mit einem einzelnen werksmäßig gestatteten Sicherungsschlüssel. Der Lizenzgeber behält
sich das Recht vor, nach eigenem Ermessen die Software und den Inhalt der Maschine zu
verbessern. Sie sind dafür verantwortlich ihren individuellen, vom Lizenzgeber werksmäßig
gestatteten Sicherheitsschlüssel, ihr Passwort oder anderweitigen Identifikationsmechanismus
instandzuhalten und abzusichern gegen die Nutzung durch eine dritte Partei, und sie akzeptieren
die Verantwortung für jegliche Nutzung der besagten Software durch eine dritte Partei mithilfe
ihresIdentifikationsmechanismus . Obwohl der Lizenzgeber nicht regelmässig Maschinen
inspiziert, behält sich der Lizenzgeber das Recht vor, ihre Lizenz umgehend zu kündigen aus
Gründen des Missbrauchs oder bei Nichtbefolgung der Bestimmungen in diesem Vertrag. Der
Lizenzgeber behält sich ebenfalls das Recht vor, die Software von Zeit zu Zeit nach eigenem
Ermessen zu inspizieren oder zu überprüfen. Im Falle, dass der Lizenzgeber Zugang zu dem
Gerät wünscht, in dem besagte Software installiert ist, erklären Sie sich bereit, dass sie dem
Lizenzgeber, wenn nötig, Erlaubnis und Hilfe beim Zugang zum Gerät verschaffen.

Beschränkungen
11.

ABGESEHEN VON DEN BESTIMMUNGEN DES PARAGRAPHEN „BESCHRÄNKTE GARANTIE"
GIBT DER LIZENZGEBER KEINE SONSTIGEN VERSPRECHEN, VERPFLICHTUNGEN ODER
GARANTIEN, OB AUSDRÜCKLICH ODER STILLSCHWEIGEND, FÜR DIE SOFTWARE ODER
IHRE BESTANDTEILE ODER FÜR ALLE ANDEREN MATERIALIEN, DIE IHNEN IM RAHMEN DIESES
ABKOMMENS ZUR VERFÜGUNG GESTELLT ODER ÜBERLASSEN WERDEN, UND DER
LIZENZGEBER LEHNT AUSDRÜCKLICH ALLE ANSPRÜCHE AUF MARKTFÄHIGKEIT UND
EIGNUNG DER BESAGTEN MATERIALIEN FÜR DEN GEWÖHNLICHEN GEBRAUCH AB. SOWEIT
GESETZESMÄSSIG ZUGELASSEN, SOLLEN DIE HANDELSRECHTLICHE GESETZGEBUNG
AUS DEM UNIFORM COMMERCIAL CODE ODER ANDERE GESETZE AUF DIESES ABKOMMEN
NICHT ANWENDBAR SEIN.

Haftungsbeschränkung
12. DER LIZENZGEBER HAT KEINERLEI HAFTUNG BEI EINEM ANSPRUCH, EINER FORDERUNG

ODER EINER KLAGE, DIE AUF NUTZUNG DER SOFTWARE, DEREN INSTALLIERUNG, DER
LEISTUNG DES LIZENZGEBERS ODER DESSEN VERSAGEN IM RAHMEN DIESES ABKOMMENS
FÜR JEGLICHE FOLGE-, INDIREKTE, SONDER- ODER NEBENSCHÄDEN BERUHEN, SELBST
WENN DER LIZENZGEBER AUF DIE MÖGLICHKEIT EINES SOLCHEN ANSPRUCHES, EINER
FORDERUNG ODER EINER KLAGE HINGEWIESEN WURDE. WEITERHIN UND OHNE
BESCHRÄNKUNG DES LETZTEN SATZES, DÜRFEN IN ALLEN FÄLLEN DIE IHNEN ZUR
VERFÜGUNG STEHENDEN ABHILFEN DIE VON IHNEN FÜR DIE SOFTWARE AN DEN
LIZENZGEBER GEZAHLTE SUMME NICHT ÜBERSCHREITEN.

13. DER LIZENZGEBER HAT IN KEINEM FALL EINE HAFTUNG IHNEN GEGENÜBER FÜR SCHÄDEN,

EINSCHLIESSLICH ETWAIGER GEWINNVERLUSTE, NICHT REALISIERTER EINSPARUNGEN
ODER ANDERER NEBEN- ODER FOLGESCHÄDEN, DIE AUS IHRER VERWENDUNG,
MISSBRAUCH, VERLETZUNG DIESES ABKOMMENS ODER GEBRAUCHSUNFÄHIGKEIT DER
SOFTWARE ENTSTEHEN.

Allgemein
14. Die Rechtsgültigkeit und Provisionen dieses Abkommens und der darin enthaltenen Rechte und

Pflichten werden durch die Gesetze des Staates von New York bestimmt. Sollten sie diese
Vereinbarungen annehmen, dann akzeptieren Sie, dass der ausschliessliche Erfüllungsort
und Gerichtsstand bei den Gerichten von New York im Staat New York liegen hinsichtlich aller
Streitigkeiten, die diesen Vertrag betreffen, oder die durch Leistung oder Missbrauch der
besagten Software entstehen.

15. Merit kann nach eigenem Ermessen dieses Abkommen oder jedes der darin enthaltenen

Rechte und Pflichten an Dritte abtreten.

16. Bei Rückfragen über dieses Abkommen oder wenn Sie den Lizenzgeber aus einem anderen

Grund kontaktieren wollen, bitte schreiben an: Merit Industries, Inc., 2525 State Road, Bensalem,
PA 19020, USA.

23 MEGATOUCH MAXX CROWN EDITION PM0501-04